RSS

Blog posts of '2026' 'July'

Combisteel 7049.0020 First Use and Daily Cleaning Checklist
(0) Combisteel 7049.0020 First Use and Daily Cleaning Checklist
Exact-manual first-use, shutdown, cleaning and external service checks for the Combisteel 7049.0020 electric gyros grill.
How to Clean a TEFCOLD GUC70 Condenser and Cabinet Safely
(0) How to Clean a TEFCOLD GUC70 Condenser and Cabinet Safely
Exact TEFCOLD GUC70 cabinet, condenser and filter cleaning instructions from the current model manual.
How to Clean and Care for a Unifrost CRS90G Without Damaging It
(0) How to Clean and Care for a Unifrost CRS90G Without Damaging It
Manual-based CRS90G cleaning guidance covering power isolation, prohibited cleaning methods, door-seal care, food storage and condenser work.
How to Defrost a TEFCOLD UF400: Current-Manual Sequence
(0) How to Defrost a TEFCOLD UF400: Current-Manual Sequence
The exact TEFCOLD UF400 manual-defrost trigger, six-step sequence, safety limits and service details.
Why Are Blue Plasters Used in Catering? A Comprehensive Guide
(0) Why Are Blue Plasters Used in Catering? A Comprehensive Guide
The goal of this blog is to educate readers on the importance of using blue plasters in catering environments, explaining their purpose, legal requirements, and benefits for food safety.
Italforni EGA-1 Burner Will Not Stay Lit? Operator Reset Limits and When to Call Service
Italforni EGA-1 Burner Will Not Stay Lit? Operator Reset Limits and When to Call Service
For a trained operator, the EGA-1 permits a tightly limited burner-reset sequence: press the external red burner reset button once. Only if the red warning light remains on may the button be pressed one further time after “a few minutes”. If the burner still does not ignite, stop resetting and contact the technical service centre. If it ignites but then repeatedly goes out, do not cycle the reset: the manual provides no separate operator repair procedure for recurring shutdown, so refer it to technical service. [EGA1-20-01, EGA1-21-02, EGA1-21-03, EGA1-21-04, EGA1-19-01]
Chefsrange AD10 Mixer Attachments and Speeds for Dough, Beating and Whipping
Chefsrange AD10 Mixer Attachments and Speeds for Dough, Beating and Whipping
A source-locked AD10 guide to selecting the dough arm, beater or wire whip, observing the stated capacity and changing attachments with the mixer stopped.
How to Change the Temperature on a TEFCOLD GUC70 Fridge Controller
How to Change the Temperature on a TEFCOLD GUC70 Fridge Controller
Hold SET for three seconds until the °C symbol flickers, adjust the displayed value with the arrow buttons, and release the buttons to set the new temperature. This guide covers only the normal operator controls documented for the TEFCOLD GUC70.
How to Clean and Sanitise a Blizzard BIM40 Ice Maker
How to Clean and Sanitise a Blizzard BIM40 Ice Maker
A source-locked cleaning guide that separates manual cleaning from the powered automatic cycle and escalates ambiguous internal maintenance to qualified personnel.
Combisteel 7013.2570 Not Cooling Properly? Safe Checks Before Calling an Engineer
Combisteel 7013.2570 Not Cooling Properly? Safe Checks Before Calling an Engineer
Check the Combisteel 7013.2570’s external power supply, installation clearance, location, door closure and operator temperature setting before escalating. Do not open the appliance or attempt electrical, refrigerant or sealed-system diagnosis.