Back to all

How to Lock and Unlock the Combisteel 7020.0135 Induction Wok Controls

How to Lock and Unlock the Combisteel 7020.0135 Induction Wok Controls

Lock the controls

After selecting a function, press the lock control until Loc is displayed.

Loc and the selected function then alternate on the display.

While Loc is displayed, only On/Off responds.

Unlock the controls

Press the lock control again until two bi sounds occur.

The manual says every button then works normally.

Operating modes

Heating mode starts at 2000 W and is adjustable from 500 W to 3500 W.

Temperature mode starts at 100°C and is adjustable from 60°C to 240°C.

The timer can be set from 0 to 180 minutes with either heating or temperature mode.

Pressing On/Off during operation stops the cooker immediately.

The fan then runs for one minute before switching off.

If E02 appears, wait a few minutes and let the appliance cool.

Cookware and cleaning

Use a rounded-bottom stainless-steel wok.

The manual does not recommend other cookware.

Unplug and cool the cooker completely before cleaning.

Use dishwashing agent and a damp cloth, and vacuum dirt from the air intake and exhaust vent.

Never run water over the unit.

Product and manual

Comments
Write a comment Close
*
Only registered users can leave comments.